A faucet that sprays or a hose that splits under the sink needs the valve closed right away. Reach under the sink, turn the angle stops clockwise, and call (385) 488-1892. Dispatch is open 24/7, and most faucet repairs finish on one visit.
Faucet repair is a small job with a large effect on your water bill and your cabinets. A slow drip can waste thousands of gallons over a year, and a loose supply line can rot the cabinet floor before you notice.
What to do before the plumber arrives
Find the stops
The two small valves under the sink control hot and cold. Turn each clockwise until it stops.
Empty the cabinet
Pull stored items out and lay a towel and a bowl under any drip.
Note the brand
A photo of the faucet and any name on the base helps us bring the right cartridge.
Turn off the main if stops fail
Old stops sometimes seize or leak. If water will not stop, close the main water valve.
Why faucets fail
Worn cartridges
Single-handle faucets rely on a cartridge that wears and starts to drip at the spout.
Mineral buildup
Hard water leaves scale on aerators and valve seats and can jam handles. Draper City reports total hardness up to 357 mg/L at some sources.
Failed O-rings
Leaks around the handle or at the base of the spout often trace to dry O-rings.
Tired supply lines
Braided lines have a service life, and a split under the sink can release water quickly.
Faucet types and typical repairs
| Type | Common problem | Repair |
|---|---|---|
| Cartridge (single handle) | Drip from the spout, handle feels loose | Replace the cartridge and seals |
| Ball (single handle) | Leak at the base, inconsistent temperature | Replace springs and seats or the whole assembly |
| Ceramic disc | Drip after the handle is closed | Replace the cylinder and seals |
| Compression (two handle) | Drip from the spout | Replace the washers and seats |
| Pull-down kitchen | Weak spray, hose leak under the sink | Clean the aerator, replace the hose or the faucet |
If the faucet is more than fifteen years old or the finish is peeling, a new one often costs less than chasing parts. We can install a faucet you supply or recommend one that suits your sink. If the leak turns out to be a failing drain, see drain cleaning.
Spray under the sink?
Call the 24/7 line. Close the angle stops and we will come repair the line.
Hard water and aerators
If water pressure at the faucet looks weak, the aerator at the tip is often clogged with scale. Unscrew it, soak it in vinegar and rinse. If pressure is low across the house, the problem may be elsewhere, such as a pressure regulator or the supply line.
Your water bill tells you whether Draper City or WaterPro supplies your home, and either can answer questions about local hardness and pressure. A water softener helps if scale keeps returning.
Outdoor faucets in winter
Freezing weather in Draper from November to March can split an outdoor hose bib that still has a hose attached. The split may be inside the wall and only show when water is turned on in spring. Disconnect hoses in fall and ask about frost-free bibs. If one has already split, burst pipe repair covers it.
What changes the price of faucet repair
Insurance seldom covers a worn faucet, though water damage from a sudden line break may be covered. Want your real number? Call (385) 488-1892.
Sources and standards behind this page
Fixture work follows the International Plumbing Code (IPC) as amended by the Utah State Construction Code in Utah Code Title 15A. Hardness data come from Draper City's 2022 water quality report, and the cross-connection warning about unprotected hoses comes from the city's cross-connection program.
Straight Answers
Yes. Call (385) 488-1892 any hour. Close the shutoff valves under the sink and the plumber will fix the supply line or faucet.
A faucet dripping once per second can waste thousands of gallons in a year, depending on drop size. Fixing a drip is cheap compared with the water lost.
Either. We repair when parts are available and the faucet is sound, and replace when it is old, corroded or costs about the same as a new one.
A clogged aerator or cartridge is the usual cause. If every fixture is low, check the main valve and pressure regulator.
They are angle stops or shutoff valves. Turning them clockwise closes the water to that faucet.
Yes. Bring the fixture and the install kit, and we will mount it and test the supply lines.
